01-24-2005, 10:33 PM
Teste en réglant ton clavier en qwerty (dans paramètres régionnaux de windows).
Sinon expose ton problème à Andy (andy@ultimarc.com), il est sympa et répond vite ... le soir.
Sinon teste aussi voir si tu as pas une couille avec tes boutons avec cette manip :
Part of the shift function design means that to avoid "stuck" keys, shift functions are disabled when any key is pressed. So loss of shift functions means you have a shorted or stuck switch. Problem is, which one? There are two ways to determine this. The on-board LED gives an indication of which input is shorted, see later in this section.Or use the built-in test mode:Run any text-display program such as Notepad, or if you are in DOS type "COPY CON" to turn off the command prompt. With a keyboard plugged into the pass-through port, press CTRL-ALT-P (press and hold each key in this order). You will go into programming mode. If the MAME/ALT jumper is set to MAME you will go right into test mode. If not, you will see a menu. Enter "T" for test mode. The offending stuck input(s) will be displayed on the screen.
Sinon expose ton problème à Andy (andy@ultimarc.com), il est sympa et répond vite ... le soir.
Sinon teste aussi voir si tu as pas une couille avec tes boutons avec cette manip :
Part of the shift function design means that to avoid "stuck" keys, shift functions are disabled when any key is pressed. So loss of shift functions means you have a shorted or stuck switch. Problem is, which one? There are two ways to determine this. The on-board LED gives an indication of which input is shorted, see later in this section.Or use the built-in test mode:Run any text-display program such as Notepad, or if you are in DOS type "COPY CON" to turn off the command prompt. With a keyboard plugged into the pass-through port, press CTRL-ALT-P (press and hold each key in this order). You will go into programming mode. If the MAME/ALT jumper is set to MAME you will go right into test mode. If not, you will see a menu. Enter "T" for test mode. The offending stuck input(s) will be displayed on the screen.
Fuerza el canut !